Self Adhesive Mirror Wall Tiles

Self Adhesive Mirror Wall Tiles

Self Adhesive Mirror Wall Tiles

Self Adhesive Mirror Wall Tiles – The following tutorial is for fitting mirror glass with adhesive, by Mirror Outlet. It is recommended that the glass is measured to ensure the correct size has been ordered. And should be stored upright, on a soft surface to prevent chipping. Always handle your glass with gloves. Before starting, use a metal detector to check the walls for any pipes that may be underneath. Measure up against the wall where the mirror is going to be positioned. Making a mark, where the middle of the baton will be placed.

So you will know where the screws will need to go. Screw in the anchor, in to the wall. And add all of the screws with the baton now placed back on the wall. After removing the top, place your glue into the dispenser so that it is ready to use. Remember to put on your gloves before handling the glass. Apply the glue in circular motions, Roughly in a diameter of 20cm. Make sure that it covers all areas, particularly the corners. With assistance, lift the mirror on top of the baton, so that it is resting. Gently press the mirror against the wall to ensure good contact is made. The glass should remain in position for twelve hours for the adhesive to dry. Adhesive tape could be used to ensure safety.

Once the adhesive is dry, the baton can be removed but the holes will need to be filled in. The mirror can now be cleaned using a professional cleaner, that can be purchased at MirrorOutlet online, or in store. Your new mirror is now safely attached to your wall.

Leave a Comment